ECOSIL 08
DESCRIPTION OF THE MACHINE
ECOSIL 08 is an automatic machine developed to put in automatic way an even and correct amount of silicone or two component glue in the frame that later will be installed around the photovoltaic module . The machine is composed by a load unit that feeds the frames to the silicone station that after applying the silicone on the frame pushes it to the operator. It is possible to select from the operator panel a working condition that permits to drill holes in the frames for humidity outlet (optional). In this case the drilling is done automatically before pushing the frame to the unload belt. The machine has a sensor that reads the state of the unload station in order to interrupt the cycle automatically when the belt is full.
Modular machines for future automation.. ECOFRAME VERTICALE and ECOSIL08 are two of the components in SPEEDY FRAMING GROUP.
BENEFITS
- Correct and even silicone quantity to guarantee a total sealing between the module and the frame;
- No silicone cleaning after framing necessary;
- Unloading of the finished frames directly to the operator;
- The machine is predisposed to be connected with framing robot;
- Hole drilling for humidity outlet (optional);
- Quick remote assistance and supervision via internet.
|
|
|
CHARACTERISTICS |
|
Operator panel |
Touch-screen |
|
Minimum frame length |
350 mm |
|
Maximum frame length |
2000 mm |
|
FUNCTION REQUIREMENTS |
|
Electrical |
380V 3 phase + neutral + ground |
|
Peak power |
2 kW |
|
Frequency |
50-60 Hz |
|
Compressed air |
6 BAR |
|
DIMENSIONS |
|
Height |
900 mm |
|
Width |
1500 mm |
|
Length |
4000 mm |
|
Weight |
700 Kg |
|
|
|
