ECOLAM 08 S
DESCRIPTION OF THE MACHINE
The ECOLAM 08 S is an automatic photovoltaic module laminator and it has been designed to allow a production in series of the photovoltaic modules with the possibility to have a modular solution of laminator. The lamination cycle permits to laminate with a continuous temperature of 180 °C which permits an use of ultra fast cure EVA. The laminated modules pass the certification IEC 61215. ECOLAM 08 S is capable to laminate not only standard photovoltaic modules but also particular architectonic modules as prismatic glass, double glass, transparent tedlar and flexible modules. It can also be used for the lamination of coloured plasma screens. The lamination cycle is automatic and controlled by a PLC. The operator interacts with the programming through the touch screen where it is possible to control the cycle in order to see the temperature or the vacuum values.
BENEFITS
- Possibility to work with a continuous work temperature of 180° C;
- Possibility to set different temperatures in 12 different zones;
- Different level of vacuum in the chambers is settable from the touch-screen for different types of modules;
- All parameters are settable from the touch-screen;
- Troubleshooting directly on the touch-screen with alarm message;
- The touch-screen visualizes a diagram with all vacuum and temperatures values;
- Low energy cost;
- Long lifetime of the silicone membrane;
- Membrane change in less than 20 minutes with quick clamp system with plates in working temperature;
- External pump housing composed one principal vacuum pump, one back up vacuum pump and a special filter to absorb the EVA gasses for a full ambient respect;
- Internal booster pump to improve and reduce the pumping time;
- Automatic release sheet in Teflon on both sides of the modules;
- Cooling system at close circuit for vacuum pump as standard;
- Cooling of the modules on the unload belt as optional;
- Alarm message when maintenance is needed;
- This machine has very little need of maintenance and all maintenance work can be performed by the operator without calling Ecoprogetti’s technicians;
- Quick remote assistance and supervision via internet.
|
|
|
CHARACTERISTICS |
|
Temperature range |
From room temperature to 180 °C |
|
Temperature uniformity |
2 °C |
|
Max. thickness of laminate |
30 mm |
|
Operator control |
Embedded PC touch screen panel |
|
FUNCTION REQUIREMENTS |
|
Electrical |
380V 3 phase + neutral + ground |
|
Peak power |
130 kW |
|
Frequency |
50-60 Hz |
|
Compressed air |
6 BAR |
|
DIMENSIONS |
|
Laminator size |
5570 mm x 2820 mm |
|
Usable area (width x length) |
4400 mm x 1950 mm |
|
|
